ECO-WORTHY CSP1500, Руководство пользователя

Страница: 7 / 12

Installation
Location Recommendation
Warning:
Make sure inverter is in the off position before connecting
anything.
Caution: Do not over tighten the terminals.This could potentially
damage the unit.
1.Dry
，
cool
，
well-ventilated area
Inverters must be in an area where the fans are not blocked or where
they are not hit directly by the sun. They should be in an area free of any
kind of moisture and allow for clearance of at least 10” around the unit
to provide for adequate ventilation.
2.Protection against fire hazard The unit should be away from any flam-
mable material, liquids, or any other combustible material.
3.Close proximity to battery bank Prevent excessive voltage drop by
keeping the unit close to the battery bank and having a properly sized
wire going from the battery bank to the inverter.
4.Do not install the inverter in the same compartment as the battery
bankbecause it could serve as a potential fire hazard
！！
-5-
Wiring Step
First confirm that the AC output switch is turned off, then connect the
battery to the inverter, you need to distinguish 12V battery pack or 24V
battery pack, then connect the solar panels to PV input of terminal of
inveter, Be careful of the positive and negative poles. and turn on
the inverter Switch at last.