Disabling a damaged riser tube
Turning the system off (automatic systems)
Magen eco-Spark
®
Installation manual. © 2012, all rights reserved
P a g e
|
46
6
Push the plastic repair plug all the way down into the repair sleeve. You may use the
rear part of the handle to push it firmly into the sleeve.
The hole is now plugged and will not leak.
8
Grab the polycarbonate glazing
with both hands, and firmly pull
towards you to expose the risers on
the other side of the panel.
9
Repeat steps
2
to
7
for the end of the panel you just exposed.
10
Pull back the glazing to its original position and re-attach the stoppers.
11
The panel is now leak free while its uniform appearance is restored.
7
Cut the riser tube so it fits exactly
between the broad heads of the
plastic pins. Fit the riser onto the stub
of the repair plug.
