Installation
PIPES CONNECTIONS - pex welding
Magen eco-Spark
®
Installation manual. © 2012, all rights reserved
P a g e
|
30
4
Mark the area that will require
scrapping.
3
Measure and mark the length of the
part you will be using.
5
Scrap the area until the lines you just
marked disappear.
6
Mark how much of the pipe should be
inserted into the part you are using.
7
Clean the edges with Alcohol.
8
Insert the pipes into the connector
9
Fix the pipes into the fitting. Hold it in place
using designated support, attach the wires and
weld.
When the machine indicates that the
welding is terminated, gently disconnect the wires.
Don't dismantle the support until you allowed
enough cooling time.
