ECO-MATIC ESC 16, Руководство по эксплуатации

Страница: 78 / 128

10
Step 5 – Remove the nut on the top of the
transformer with an 8mm spanner
then lift off the black heat dispersion
disk which when removed allows
for the transformer to be lifted out of
the chlorinator. When removing heat
dispersion disk also remove the
spring washer & flat washer located
beneath the nut.
Assembly
Step 1 – Place transformer over the locating
screw.
Step 3 – After feeding the transformer wires
through the clear tubing use a
soldering iron with unleaded solder
to attach the wires to the PCB. The
order for connecting the wires from
the left of the PCB is 1) orange, 2)
white, 3) pink.
Step 2 – Place heat dispersion disk over
the transformer with the shiny
metallic side face up. Place flat
washer & spring washer in place
over the locating screw; tighten
the transformer nut using an 8mm
spanner.
1. ORANGE
2. WHITE
3. PINK