ECM Elektronika II Prof, Руководство пользователя

Страница: 26 / 33

Ε
NGLISH
Instruction manual ELEKTRONIKA II PROFI
25
6.3 Dispensing hot water
1 Place an adequate water container (with a heat-insulated handle) under the hot water dispenser. After having
moved the power switch into the lower position, you can dispense water (e. g. for tea) by opening the hot water
lever.
2 After dispensing water, switch the machine on again. The boiler will be filled with fresh water automatically.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch the machine off for dispensing water.
Caution!
Place the nozzle of the dispenser into the water container in order to avoid injuries due to hot water
splashes.
6.4 Dispensing steam
With the ELEKTRONIKA II Profi, you can generate a large amount of steam in order to heat or froth beverages, e. g.
milk or punch. It is a professional and compact espresso coffee machine with an enormous steam volume. Therfore,
within a few seconds you can prepare milk froth. Please pay attention to the instructions noted below. Do not bring
the milk to a boil, otherwise frothing milk will not be possible.
1
Important: In order to get the best result when frothing the milk, open the steam lever for approx. 5 seconds to
release the condensation water in the pipe.
2 Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
3 Re-open the steam handle / steam lever.
4 Heat and/or froth the liquid.
5 After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle clean.
Risk of injury!
Always keep the steam nozzle underneath the surface of the liquid while heating or frothing to avoid
splashes.
Important!
Clean the steam nozzle and the steam dispenser after every application with a non-abrasive, damp
cloth; this way you can remove possible liquid residues.
Risk of injury!
Avoid skin contact with the steam dispenser while cleaning!
7 CLEANING AND MAINTENANCE
A regular and accurate care is very important for the performance, the long evity and the safety of your machine.
Caution!
Always switch the machine off (power switch in lower position), disconnect the power cord and let the
machine cool down to ambient temperature (for at least 30 minutes) before cleaning.
7.1 General cleaning
Daily cleaning:
Filter holders, filters, water tank, drip tray, drip plate of the drip tray, measuring-spoon and tamper require daily
cleaning. Use warm water and/or food safe detergent for cleaning.
Clean the shower plate and the group gasket in the lower part of the group and remove visible dirt without
dissasembling the parts.