27
10 CE CONFORMITY
Conformity
The product complies with the following EU Directives:
Machine:
98/37/CE
Low Voltage:
73/23/CEE/, 93/68/CEE
EMC:
89/336/CEE, 93/68/CEE, 92/31/CEE
PED:
97/23/EC
EN-Directives: EN 60335-1, EN 60335-2-75, EN 55014-1, EN 61000-3, EN 61000-4, EN 55104-2, EN50366
11 TROUBLESHOOTING
Problem
Possible Cause
Troubleshooting
The grind is not fine enough
Use a finer grind.
Tamp the ground coffee more firmly.
Reduce the brewing pressure.
The coffee mixture is too old.
Use fresh coffee
There is too much chlorine in the
water.
Use a chlorine filter.
The amount of ground coffee is not
enough.
Use the right coffee amount:
Approx. 7 g of coffee for each cup.
Little or no crema on top of the
coffee
The shower screen is dirty.
Clean the brew group.
The grind is too fine.
Increase the grind.
Tamp the ground coffee only
slightly.
Increase the brewing pressure.
Sparse coffee dispensing, only drop
by drop
There is too much ground coffee.
Use approx. 7 g of coffee for every
cup.
The grind is not fine enough.
Reduce the grind.
The coffee is old.
Use fresh coffee.
The amount of ground coffee is not
enough.
Use approx. 7 g of coffee for each
cup.
Weak “body”
The shower screen is dirty.
Clean the shower screen.
The coffee beans are improper
Use another coffee bean.
Foam instead of crema
The setting of the coffee grinder is
not suited for the coffee beans in
use.
Adjust the coffee grinder (When
changing the coffee beans, changing
the grind can also be necessary.)
Filter holder is not fixed properly.
Fix the filter holder properly.
Filter holder/ brewing group is
dripping
Group gasket is broken.
Change group gasket and shower
screen.
Different quantities of coffee
Different grind
Irregular tamping
Different doses when preparing
1 espresso, 2 espresso etc.
Different types of coffee beans
Make sure to maintain the same
parameters.
Содержание 88644
Страница 1: ......
