Eclipse EC-P10, Руководство по установке

Страница: 16 / 48

16 P0016-LI-02.01
Menu Navigation and Data Entry
Each programming location is accessed by entering its four digit
location number followed by
*
. If you don’t know the exact
location you can enter less than four digits and the panel will take
you to the first location that starts with numbers you have
entered. For example if you enter
12
the panel will take you to
location 1201 – Zone 01 Wiring Type.
LCD Navigation
If the system is fitted with an LCD keypad, you can navigate
through the main menu using the following keys:
A
= Next program section
S
= Previous program section
*
= Select location of displayed section
R
= Back a menu level
LCD main menu navigation
Engineers Menu
Location:----
Engineers Menu: 1101
Zone Setup
Engineers Menu: 2001
Away/Stay Options
Enter Engineers code
1234
Engineers Menu: 3101
Global Options
Engineers Menu: 3501
Control Timers
Engineers Menu: 3601
System Text
Engineers Menu: 3701
Voice/System Links
Engineers Menu: 4111
Keypad Options
Engineers Menu: 6111
Panel Outputs
Engineers Menu: 7001
ARC Options
Engineers Menu: 7311
Speech Dialler
Engineers Menu: 7400
UDL Options
Engineers Menu: 8100
User Codes
Engineers Menu: 9001
Adjust Clock
A
S
Section start location
Section description
A
S
*
=Next(up)
=Previous (down)
=Select section
Engineers Menu: 5111
Expander Options
LCD sub menu navigation
Zone 01 Type
Final Exit 1
Zone 01 Wiring
Normally Open
Zone 01 Attributes1
.2..5..
Zone 01 Bypass
12.....
Zone 01 Chime
Off
Zone 01 On Test
No
Zone 01 Text
Front Door
Zone 01 Link
000
*
A
S
Engineers Menu
Location:----
Engineers Menu: 1101
Zone Setup
Enter Engineers code
1234
Section start location
Section description
A
S
*
=Next(up)
=Previous (down)
=Select section
A
S
*
#
R
= Next(up)
= Previous (down)
= Previous location
= Next location
= Back a menu level
Selection List
This type of data entry is used when selecting an option from a
predefined list. Each item in the list has a number and associated
description. When using the LCD keypad for programming the
description is displayed. The LED keypad can only display the
number. The figures below show the programming procedure for
both LED and LCD remote keypads:
Selection List: LED Keypad
En
1 1 0 1
Enter Engineers code
????
Enter location No
e.g. 1101
????
Press to display
the current value
*
1 1 0 1 =1
Location number & current
value are displayed.
Enter item number, e.g., 04