5
Eclipse Packaged Gas BoostPak, V2, Installation Guide 630-2, 6/22/2010
Safety
Important notices for safe operation of the BoostPak
system will be found in this section. To avoid personal
injury, damage to property or the facility, the following
warnings must be observed. Read this entire manual
before attempting to start the system. If any part of the
information in this manual is not understood, contact
Eclipse before continuing.
Safety Warnings
Ŷ
The BoostPak packaged gas booster systems,
covered by this guide are designed to increase gas
pressure to a gas utilization appliance. All fuel
handling devices are capable of producing fires
and explosions if improperly applied, installed,
adjusted, controlled or maintained.
Ŷ
Do not bypass any safety feature; fire or explosion
could result.
Ŷ
Never try to operate a BoostPak if it shows signs
of damage or malfunction.
Ŷ
This manual provides information in the use of the
BoostPak for its specific design purpose. Do not
deviate from any instructions or application limits
described herein without written advice from
Eclipse.
Capabilities
Only qualified personnel, with good mechanical aptitude
and experience with combustion equipment, should
adjust, maintain or troubleshoot any mechanical or
electrical part of this system.
Operator Training
The best safety precaution is an alert and trained
operator. Train new operators thoroughly and have them
demonstrate an adequate understanding of the
equipment and its operation. A regular retraining schedule
should be administered to ensure operators maintain a
high degree of proficiency.
Replacement Parts
Order replacement parts from Eclipse only. Any customer
supplied valves or switches should carry UL, FM, CSA,
CGA and/or CE approvals where applicable.
DANGER
NOTICE
2