4
Eclipse Packaged Gas BoostPak, V2, Installation Guide 630-2, 6/22/2010
Introduction
Product Description
The Eclipse BoostPak is designed for installations when
the gas pressure to a building is inadequate to operate the
appliances. It provides a reliable cost-effective packaged
solution for pumping low natural gas supply pressures up
to meet the requirements of high performance combustion
equipment. The discharge pressure is the total of the
booster added pressure plus the incoming gas pressure.
The BoostPak is a completely integrated skid mounted
package. It is factory assembled, wired, tested, and ready
for field power and gas connections. The system includes
but is not limited to a hermetically sealed centrifugal type
gas booster blower, check valve, gas pressure switch,
isolating valves, inlet and outlet piping and flange
connectors, pressure gauges, and control system all
mounted, assembled, wired, and tested. All essential
components for automatic operation are enclosed in an
industrial control panel designed to meet local and
national electrical codes.
Various standard options may be selected to configure a
complete model number. The options determine the
control modes, pressure boost, flow, and environmental
conditions.
Figure 1.1. Eclipse BoostPak
Audience
This manual has been written for personnel already
familiar with all aspects of a gas booster system and it’s
add-on components.
These aspects are:
• Installation
• Use
• Maintenance
• Safety
The audience is expected to be qualified and have
experience with this type of equipment and its working
environment.
Purpose
The purpose of this manual is to make sure that you carry
out the installation of a safe, effective and trouble-free
system.
BoostPak Documents
Installation Guide No. 630-2
• This document
Datasheet No. 630-2
• Available for BoostPak model MS
• Provides assembly drawing numbers
• Required to complete installation
Datasheet No. 630-3
• Available for BoostPak model MR
• Provides assembly drawing numbers
• Required to complete installation
Datasheet No. 630-4
• Available for BoostPak model MH
• Provides assembly drawing numbers
• Required to complete installation
Related Documents
• EFE 825 (Combustion Engineering Guide)
• Eclipse Bulletins and Information Guides: 620, 710,
780, 904 (MH only), 925 (MH only), 940
1