Eclipse Security Tribrid, Руководство пользователя

Страница: 246 / 266

H
DCVI Standalone DVR User’s Manual
237
There are following possibilities:

Check the camera is online or not.

Check IP channel setup is right or not (such as IP address, user name, password,
connection protocol, port number.).

The camera has set the whitelist (Only the specified devices can connect to the
camera).
30. After I connected to the IP channel, there one-window output is OK, but there is
no multiple-window output.
There are following possibilities:

Check the sub stream of the camera has been enabled or not.

Check the sub stream type of the camera is H.264 or not.

Check the device supports camera sub stream resolution or not (such as 960H,
D1, HD1 and etc.).
31. After I connected to the IP channel, there multiple-window output is OK, but
there is no one-window output.
There are following possibilities:

Check there is video from the IP channel or not. Please go to the main
menu->info->System->BPS to view bit stream real-time information.

Check the main stream of the camera has been enabled or not.

Check the main stream type of the camera is H.264 or not.

Check the device supports camera main stream resolution or not (such as 960H,
D1, HD1 and etc.).

Check camera network transmission has reached the threshold or not. Please
check the online user of the camera.
32. After I connected to the IP channel, there is no video output in the one-window
or the multiple-window mode. But I can see there is bit stream.
There are following possibilities:

Check the main stream/sub stream type of the camera is H.264 or not.

Check the device supports camera main stream/sub stream resolution or not
(such as 1080P, 720P, 960H, D1, HD1 and etc.).

Check the camera setup. Please make sure It supports the products of other
manufacturers.
Daily Maintenance

Please use the brush to clean the board, socket connector and the chassis regularly.

The device shall be soundly earthed in case there is audio/video disturbance. Keep
the device away from the static voltage or induced voltage.

Please unplug the power cable before you remove the audio/video signal cable,
RS232 or RS485 cable.