USER MANUAL / MANUAL DE USUARIO
– MICROSTAR
Page
16
of
60
INMANUUML017 USER MANUALM. USO OM-100 V.2022.05 ENGESP US
Lift and place the extension column as shown in the picture. You must achieve a perfect fit
with the wall-
mount. With the supplied 3/16’’ Allen key tighten up the 3 screws on the wall-
mount.
8)
Lift and place the microscope’s forearm as shown in the picture. You must achieve a perfect fit
with column. With the supplie
d 3/16’’ Allen key tighten up the 3 screws.
Finally, verify that the procedure has been correctly performed by rotating the arm around the
support, in both directions, until you reach the end. The movement is limited to an arc of 170º.
9) Connect one end of the wall-mount power cable from the light source to the upper connector
of the wall-mount and the 3 meters AC interlock cable from the connector underneath the wall
mount to the electric power network.
For proper visualization of the electrical connections, the wall-mount is shown without the
forearm.
10) Follow steps 5 thru 9 from 4.4. section for head, binocular, eye pieces and lamp source
installation.
4.5 CEILING-MOUNTED MODEL
– OM100C
ECLERIS does not provide the materials nor the instruction for the ceiling support installation and
is not responsible for its incorrect attachment or any physical or equipment damage that may
occur due to incorrect fixation.
A construction specialist should analyze the correct installation of the ceiling support.
1)
Loosen the 3 screws of the inner telescopic column by using the supplied 3/16’’ Allen key.
