7
5.3. Remote Control GPO Ports
WPaBT has 1 NO/NC (normally open/normally closed) relay output on its rear panel. This
output’s change of status is associated with the
detection of active A2DP audio
connections. This makes it possible for it to interact with external equipment, such as
motors for projection screens or movable partitions, lights, sirens, GPI inputs from other
equipment, etc.
5.4. eMCONTROL1 connection
WPaBT can provide a remote audio input for a HUB device, using it in combination with
eMCONTROL1. Additionally, an external power supply is not required, as power is
supplied by the HUB device via eMCONTROL1.
Figure 2: WPaBT + eMCONTROL1 connection diagram
Note:
Either LEFT or RIGHT outputs can be connected. Ensure that the output is set to
mono using the Ecler Bluetooth® Manager configuration application.
