Echowell echoElite Vi, Руководство пользователя

Страница: 16 / 46

AUTO-UPDATE
Auto-update works with data sent over DAB, FM or the Network. The clock is only updated when in a corresponding
mode, so it is best to select a mode you use regularly. DAB and FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Frontier Silicon Internet radio portal when in network-connected mode.
• Select "Update from DAB", "Update from FM", "Update from Network" or "No update".
• If you are updating from the network, set your time zone.
• If your country uses daylight saving, the automatically updated time from the network
may be wrong by one hour. When daylight savings are in effect (during the winter),
turn on the Daylight savings option to rectify this. Note that if you are updating the
time from DAB or FM, the Daylight savings option has no effect on the clock’s time.
The radio will auto-update from the selected source when time information is available.
MANUAL SET
If you set "No update", the wizard now prompts you to set the time and date manually.
The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with the first value,
dd, active (flashing). Adjust each value with the "Select" control. As each value is set, the
next value becomes active and flashes.
15
Auto update
Update from DAB
Update from FM
Update from Network
No update
Set Time/Date
01-01-2007
11:42