EN 20
FUNCTION DESCRIPTION
2. The sum of ODO 1 and ODO 2 equals ODO 1+2. (i.e. total distance
of bikes 1 and 2)
3. The total odometer data cannot be cleared by the reset operation.
T.RT <1>+<2>: Total Riding Time bike1+2
1. With this function, the computer accumulates the total riding time of
the two bikes you ride.
2. The sum of T.RT 1 and T.RT 2 equals T.RT 1+2. (i.e. total riding
time of bikes 1 and 2)
3. The accumulated total riding time of Bike 1 and Bike 2 cannot be
cleared by the reset operation.
Speed pacer
1. The pace arrow shows the comparison between the current speed
and average speed.
2. If the current speed is above or equal to the average speed, the
upward arrow will flash on the display.
3. On the contrary, if the current speed is below the average speed,
the downward arrow
will flicker.
Target Zone pacer
1. The pace arrow shows the comparison between the current heart
rate and average heart rate.
2. If the current heart rate is above or equal to the average heart rate,
the upward arrow
will flash on the display.
3. On the contrary, if the current heart rate is below the average heart
rate, the downward arrow will flicker
TEMP: Temperature
Temperature would be automatically detected under this mode. You
could choose either in °C or °F to display the temperature. This
function would bring you the joy of riding outdoors.
MAX TEMP/MIN TEMP:
Maximum temperature / Minimum temperature
1. With this function, the computer will display the Maximum
temperature / Minimum temperature during riding.
2. Whenever you reset the computer or change the battery, the
Maximum temperature / Minimum temperature record will be
cleared.
-------------------------------------------------------------------------------------------
ODO<1>, ODO<2>: Odometer bike1/2
1. The ODO 1, ODO 2 accumulates the total distance as long as the
bike is running.
2. The ODO 1, ODO 2 data can not be cleared to zero by Data Reset
Operation.
T.RT<1>, T.RT<2>: Total Riding Time bike1/2
1. With this function, the computer accumulates the total riding time
of a bike.
2. The total riding time data cannot be cleared by the reset operation.
ODO <1>+<2>: Total Odometer bike 1+2
1. With this function, the computer accumulates the total distance of
the two bikes you ride.