EN 19
ALTI: Current Altitude
1. The current altitude is always displayed on the upper display.
2. To get accurate basis altitude, the cyclist should calibrate the
altitude before each ride.
3. The measurement is based on the principle that atmospheric
pressure decreases as elevation increases.
4. The altitude is measured by means of the atmospheric pressure,
so it's weather- dependent.
5. You may obtain the altitude data from a topographic map or the
Internet.
6. The altitude of the altimeter is pre-calibrated by the precise
instrument
at the factory before shipment.
GAIN/LOSS: Trip altitude gain bike1/2 / Trip altitude loss bike1/2
1. With this function, it displays the accumulated altitude gains during
a trip.
2. When you ride over uphill paths, the altimeter will accumulate the
altitude gains. However, when you ride over downhill paths, the
computer will accumulate the altitude loss. The altimeter always
accumulates your altitude gains only.
MAX ALTI/MIN ALTI: Maximun altitude bike1-2 /
Minimun altitude bike1-2
1. With this function, the computer displays the maximum/minimum
altitude you reach during a trip.
2. The maximum/ minimum altitude record will be cleared after you
reset the computer or change the battery.
AVG ASC/AVG DES: Trip AVG altitude ascent bike1/2 /
Trip AVG altitude descent bike1/2
1. With this function, the computer will display the average altitude
asscent/decent during riding.
2. Whenever you reset the computer or change the battery, the
average altitude asscent/decent record will be cleared.
MAX ASC/MAX DES: Trip MAX altitude ascent bike1-2 /
Trip MAX altitude descent bike1-2
1. With this function, the computer will record your
maximum/minimum
asscent/decent during riding.
2. Whenever you reset the computer or change the battery, the
maximum/minimum asscent/decent record for a trip will be cleared.
MILLIBAR: Barometer
1. The altimeter is essentially a barometer, and millibar is a unit of
atmospheric pressure. (e.g. Standard atmospheric pressure at sea
level is about 1013 millibars.)
2. The altimeter converts the millibar value of atmospheric pressure
into the current altitude.
3. Attention: There is a hole at the bottom of the main unit for
measuring the air pressure. The hole for measurement should be
always kept clean. Besides, do not poke anything into the hole to
avoid damage.
FUNCTION DESCRIPTION
