EN 28
1. Watch the road. Don't pay much attention to your cycle computer functions during riding to avoid accidents.
2. Don't expose the main unit to direct sunlight for a long time while you're not riding with it. Never disassemble the device or the accessories.
3. Don't poke a needle or any pointed article into the hole on the bottom of the main unit. To poke anything into the hole may damage the
pressure sensor inside the device.
4. Check the positions of the sensor and magnet, and check the gap between both parts regularly. Make sure they are always in normal
condition.
5. Use a dry or slightly damp cloth to clean the computer when necessary. Do not use thinner, alcohol or benzine to clean the product.
6. Do not operate the computer under water though it's waterproof. Note there are sensitive components inside the main unit.
7. Be alert to the sudden weather change during long-distance riding to avoid danger. And sudden change in temperature may cause a
temporary incorrect altitude display.
8. Take care of your chest belt. Wash the chest belt by suds, then flush out with water. Let it dry it naturally, avoiding putting the chest belt under
the environment of high temperature or touching the corrosive as strong acid or alkalis material.
9. Wetting the skin, where will contact the conductive area of the chest belt will improve the conduction and get more stable signal.
10. The physical condition of individual might effect the intensity of measured signal.
11. Avoiding using the computer close to trolley car, tram stop, transformer, electric substation and high-tension distribution line etc.
Because the radio signal will be affected under the environment as high voltage and strong magnetic field.
12.To ensure your safty, please use the chest belt for heart rate function under a doctor or coach’s direction if you have one of the following
conditions:
12-1. Cardiopulmonary disease.
12-2. Obesity.
12-3. No exercise for an extended period of time.
PRECAUTIONS
