EchoStar DISH 500+, Руководство по установке

Страница: 16 / 28

14
Run Check Switch. Run
Check Switch
again and confirm reception for 110°W, 119°W, and
118.7°W satellites if using DISH 500+ and for 110°W, 119°W, 129°W, and 118.7°W satellites if
using DISH 1000+ (see Figures 17, 18, 19, 20, 21, 22, and 23 depending on your configuration).
Install additional receivers. If installing an additional receiver, follow steps 7 through 13,
pages 10-12. Make sure the
Installation Summary
screen shows reception from the 110ºW,
119ºW, and 118.7°W satellites for DISH 500+ and from the 110ºW, 119ºW, 129ºW, and 118.7°W
satellites for DISH 1000+. If using a legacy receiver, keep a DISH Pro, DISH Pro Plus, or a DISH
Pro X receiver connected and powered at all times to power the LNBF.
13.
14.
Figure 17. DISH 500+
Installation Summary
Figure 18. DISH 1000+
Installation Summary
Figure 19. DISH 500+
Installation Summary
Figure 20. DISH 1000+
Installation Summary
Figure 21. DISH 500+
Installation Summary
Figure 22. DISH 1000+
Installation Summary
Figure 23. XiP
Installation Summary