Echometer Model-H Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 83

Echometer Model-H Скачать руководство пользователя страница 9

Echometer Company

Model – H Manual

Phone: (940) 767-4334

5001 Ditto Lane

Page 9

Fax: (940) 723-7507

Wichita Falls, Texas 76302, U.S.A.

E-Mail:

[email protected]

•

Soft Keys

The function of each soft key change depending on the screen that is currently active. Their function is described
by the labels displayed at the bottom of the LCD display.

•

Input Connector

This BNC INPUT connector is the input to the amplifiers. When acquiring data, this INPUT connector must be
connected to the microphone connector on the acoustic wellhead using a good coaxial cable with clean
connectors.

•

USB Connector (left side)

This input/output connector is used to transfer well information records, acquired shot data records and analysis
results between the Model H and an external computer running the Model H Laptop Manager Software.

•

Battery Charger Connector (right side)

Connection to a battery charger should be made only when the instrument is outside the hazardous area.
Attaching the 110 VAC or the 220 VAC Echometer battery charger having an input of 110/220 VAC and an
output of 14.8 volts DC and 2Amps.

Note:

To maintain Intrinsically Safe certification, the unit must be charged in a safe area and can only be

charged using Echometer P/N MS1610.

«
...
7
8
9
10
11
...
»

Содержание Model-H




















































































Отзывы:

Нет отзывов