Echometer Model-H Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 83

Echometer Model-H Скачать руководство пользователя страница 24

Echometer Company

Model – H Manual

Phone: (940) 767-4334

5001 Ditto Lane

Page 24

Fax: (940) 723-7507

Wichita Falls, Texas 76302, U.S.A.

E-Mail:

[email protected]

When processing is finished the following screen is displayed:

Automatic Fluid Level Analysis

The software scans the acoustic record to identify all the signals that are similar to echoes from the liquid level
and displays a vertical dashed line labeled “LL” on the signal that has the greatest probability of corresponding to
the liquid level.

The program then builds a low pass filter designed to enhance the echoes from the tubing collars and attempts
to count as many tubing joints as possible before the signal attenuates to a level similar to the background noise
level. The point in time where the collar count stops is indicated on the acoustic trace by the vertical dashed line
labeled “C”. This filtered shot data is displayed in the Liquid Marker window as a green shot trace. The
Unfiltered/Raw shot trace is displayed as the brighter yellow.

The user should verify that the software has correctly identified the echo from the liquid level and that the collar
count marker is located near the liquid level echo for maximum accuracy.

If the user determines that the automatic analysis is not accurate, the user has the option of manually adjusting
the marker identifying the liquid level or modifying the collar count by pressing the corresponding “

Adjust

”

buttons. When the user is satisfied that the software has correctly identified the liquid level echo and generated
an accurate collar count then the analysis can be saved by pressing the button below the

Continue

label and the

screen will display the

Data Set Disposition

screen.

Manual Adjustments

The functions:

Toggle Filters, Adjust Collars, Adjust Liquid Level and Analysis Options

are discussed in

detail in the next chapter of this manual.

«
...
22
23
24
25
26
...
»

Содержание Model-H




















































































Отзывы:

Нет отзывов