echoflex ELED2, Руководство по установке

Страница: 5 / 8

Echoflex Installation Guide
Tunable White Dimming Controller
Tunable White Dimming Controller Page 5 of 8 Echoflex
Diagram 2 of 2
Electrical Terminations
Power to the controller is connected between the White (Neutral) and the
Black Line power: ELED2 (120-277 VAC) or ELED2H (240–347 VAC). The
Class 1 power limited dimming lines (violet with red stripe wires) is used to
provide 0–10 V intensity control of a dimming ballast or LED driver. The
orange wire is an antenna. Do not cut, cap or connect this wire. Use only UL
approved wire when making connections to the controller (see table below).
Connection Wire Color Specification
Load Red 14 AWG, 600 V
Neutral White 14 AWG, 600 V
Line Black 14 AWG, 600 V
Dimming 0-10 V Violet with Red 18 AWG, 600 V
Analog color control Violet with Green 18 AWG, 600 V
Dimming GND Gray 18 AWG, 600 V
Tunable White Dimming Controller
Power
LED
Clear
Button
Learn
Button
Learn
LED
LED Driver LED Emier Baery Backup
Normal Hot
Normal Neutral
ELED2 Load Control
Dim +
LED +
LED -
LED +
LED -
Dim -
Neutral
Analog color control