background image

G

RASS

 T

RIMMER

/B

RUSH

 C

UTTER

O

PERATOR

'

S

 M

ANUAL

3

IMPORTANT  The enclosed message
provides information necessary for the
protection of the unit.

NOTE  This enclosed message provides
tips for use, care and maintenance of the
unit.

This symbol accompanied by the words  WARNING
and DANGER calls attention to an act or condition
that can lead to serious personal injury to operator
and bystanders.

The circle with the slash symbol means whatever is
shown within the circle is prohibited.

M

ANUAL

 S

AFETY

 S

YMBOLS

 

AND

 I

MPORTANT

 I

NFORMATION

Throughout this manual and on the product itself, you will find safety
alerts and helpful, informational messages preceded by symbols or key
words.  The following is an explanation of those symbols and key words
and what they mean to you.

S

AFETY

DECALS

Locate these safety decals on your unit.  Make sure the decals are
legible and that you understand and follow the instructions on them.  If
a decal cannot be read, a new one can be ordered from your ECHO
dealer.  See PARTS ORDERING instructions for specific information.

Shaft Decal
Spanish Decal

English Translation

ADVERTENCIA       

       PELIGRO

Esta unidad puede ser peligrosa y producir
lesiones personales graves si no se usa en forma
adecuada. Para reducir el riesgo de lesionarse, los
operadores, los ayudantes y los espectadores
deben leer y comprender el Manual Del Operador y
los Manuales De Seguridad que se entregan
escritos en español.

WARNING    

    DANGER

This unit can be dangerous and cause
serious injury if improperly used. To
reduce injury risk to operator, helpers
and bystanders, read and understand
the Operator's and Safety Manuals,
which are provided in Spanish.

Hot Decal (near muffler)

P/N 89016006361

89022890560

P/N 89022890560

Содержание SRM-231S





























Отзывы: