Echo SRM-231S Скачать руководство пользователя

Страница: 17 / 28

RASS

RIMMER

RUSH

UTTER

PERATOR

ANUAL

STARTING

WARM

ENGINE

The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.

WARNING

DANGER

The attachment should not move at idle, otherwise serious personal
injury may result.

NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.

Stop Switch
Move stop switch button (A) away from the STOP position.

Primer
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.

Recoil Starter
Lay the unit on a flat, clear area and pull the recoil starter handle
(D) until the engine fires.

NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.

STOPPING

ENGINE

Throttle
Release throttle and allow engine to return to idle before shutting
off engine.

Stop Switch
Move stop switch button (A) backward to STOP position.

WARNING

DANGER

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using trimmer
again.

Содержание SRM-231S





























Результаты поиска

Содержание SRM-231S

Отзывы:

Похожие инструкции для SRM-231S

Бренды по названию

Популярные бренды

Echo SRM-231S, Руководство оператора

Результаты поиска

Содержание SRM-231S

Отзывы:

Похожие инструкции для SRM-231S

Бренды по названию

Популярные бренды