![background image](http://html2.mh-extra.com/html/echo/shindaiwa-402s/shindaiwa-402s_operators-manual_4857900036.webp)
OPERATION
402S
36
X7503256304
© 11/23 ECHO Incorporated
7.
Be sure that saw chain stops moving when throttle trigger is released.
Stopping
1.
Release throttle trigger (B) and
allow engine to idle.
2.
Move stop switch (A) DOWN to
“STOP” position.
Note: If engine does not stop,
pull choke control knob
out fully to stop engine.
Return the unit to your
authorized dealer to check
and repair stop switch before starting the engine again.
Do not operate with a loose chain.
Checking Chain Tension
Chain tension should be checked
frequently during work and corrected
as necessary.
Chain Lubrication Test
Hold the chain just above a dry
surface and open the throttle to half
speed for 30 seconds.
A thin line of “thrown” oil should be
seen on the dry surface.
A
B
Содержание shindaiwa 402s
Страница 61: ...402S PRODUCT REGISTRATION X7503256304 61 11 23 ECHO Incorporated...
Страница 62: ...NOTES 402S 62 X7503256304 11 23 ECHO Incorporated NOTES...
Страница 63: ...402S NOTES X7503256304 63 11 23 ECHO Incorporated...
Страница 64: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www shindaiwa usa com C69915001001 C69915999999...