MAINTENANCE
402S
46
X7503256304
© 11/23 ECHO Incorporated
If the engine is adjusted for operation above 335 m (1,100 ft.) ASL,
the carburetor must be readjusted when operating the engine below
335 m (1,100 ft.) ASL, otherwise severe engine damage can result.
1.
Before adjusting carburetor clean or replace air filter and muffler spark
arrester screen.
2.
Make sure the bar and chain are properly adjusted.
3.
Start engine and run several minutes to bring to operating temperature.
Flash choke twice during warm-up to clear any air from the fuel system.
4.
Stop engine. Turn “
H
” High Speed needle counterclockwise (CCW) to
stop. Turn “
L
” Low Speed needle midway between full clockwise (CW)
stop and CCW stop.
5.
Idle Speed Adjustment:
• Start engine, turn Idle speed adjustment screw “
T
” CW until the saw
chain begins to move, then turn screw out CCW until the saw chain
stops moving. Turn screw out, CCW, an additional 1/4 turn.
When carburetor adjustment is completed, the saw chain
should not move at idle, otherwise serious personal injury can
result.
6.
Accelerate to full throttle for two to three seconds to clear any excess
fuel in the engine, then return to idle. Accelerate engine to full throttle to
check for smooth transition from idle to high speed. If engine hesitates
turn “
L
” needle CCW 1/8 turn and repeat acceleration. Continue
adjustment until smooth acceleration results.
7.
Check idle speed and reset if necessary as described in item 5. If a
tachometer is available idle speed should be set to value listed on
specifications page.
When starting, idling adjustment speed should be adjusted to
prevent the saw chain from moving. When you experience
trouble with the carburetor, contact your dealer.
Содержание shindaiwa 402s
Страница 61: ...402S PRODUCT REGISTRATION X7503256304 61 11 23 ECHO Incorporated...
Страница 62: ...NOTES 402S 62 X7503256304 11 23 ECHO Incorporated NOTES...
Страница 63: ...402S NOTES X7503256304 63 11 23 ECHO Incorporated...
Страница 64: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www shindaiwa usa com C69915001001 C69915999999...