![background image](http://html1.mh-extra.com/html/echo/shc-210/shc-210_operators-manual_4107954020.webp)
20
LUBRICATION
Blades
Level 1.
Tools Required: Clean rag, cleaning brush, oil can
Parts Required: 20W Engine Oil (lubrication), 50-50 mixture of
kerosene and 20W oil (cleaning)
WARNING
Blades are very sharp. Wear gloves to protect hands, otherwise
serious personal injury may result.
1.
Brush loose debris from blade and coat both sides of blade with the
50-50 cleaning mixture.
2.
Allow cleaning mixture to soften the remaining gummy residue then wipe it
from the blade.
3.
Apply clean oil to the entire length of the blade. Be certain the
blade bolts are lubricated.
4.
Wipe excess oil from the blade before putting the unit back in service.
NOTE
Every unit is run at the factory and the carburetor is set in compli-
ance with emission regulations. This carburetor does not have
acceleration and high speed adjustment needles.
1.
Check idle speed using a tachometer, and reset if necessary. Turn
idle screw (A) clockwise to increase idle speed; counter clockwise
to decrease idle speed.
WARNING
When carburetor adjustment is completed, blades should not
move at idle, otherwise serious personal injury may result.
A
Содержание SHC-210
Страница 27: ...HEDGE CLIPPER OPERATOR S MANUAL 27 NOTES...