background image

16

AIR

 

FILTER

Level 1.

Tools required:

25 or 50 mm (1 or 2 in.) Cleaning brush

Parts required:

90008 REPOWER

TM

 AIR & FUEL FILTER KIT.

1.

 Close choke (Cold Start Position [

]). This prevents dirt from

entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.

2.

Remove air filter cover. Brush dirt from inside cover.

3.

Remove air filter and lightly brush debris from filter. Replace filter if
it is damaged, fuel soaked, very dirty, or the rubber sealing edges
are deformed.

4.

 If filter can be reused, be certain it:

• Fits tightly in the air filter cavity.
• Is installed with the original side out.

5.

 Install air filter cover.

NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement.

FUEL

 

FILTER

Level 1.

Tools required:

200-250 mm (8-10 in.) length of wire with one end bent
into a hook, clean rag, funnel, and an approved fuel
container.

Parts required:

90008 REPOWER

TM

 AIR & FUEL FILTER KIT

  DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing
or handling.

1.

Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.

2.

Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.

Remove the filter from the line and install the new filter.

Содержание SHC-210





























Отзывы: