background image

6

SAFE

 

OPERATION

WARNING  

  DANGER

Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can
cause serious injury or death.

Provide Safety And Operating Instructions To All Operators
• Provide all users of this equipment with the Operator's Manual and

Safety Manual for instructions on Safe Operation.

Keep a Solid Stance
• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not over reach.

Keep a Firm Grip
• Hold the front and rear handles with both hands, with thumbs and

fingers tightly encircling the handles.

Only Make Cutting Angle Adjustments With Unit Off And On Flat
Ground
• Only adjust cutting blade angle with unit flat on the ground, with the

engine stop switch in the “STOP” position.  Never adjust cutting
angle with unit standing upright.

Avoid Contact With Gear Box Assembly During Use
• Gear box assembly becomes hot during use.  Avoid contact with gear

box assembly when using unit or making cutting angle adjustments.

WARNING  

  DANGER

Never remove hands from handles with engine running or serious
injury may result.

Содержание Power Pruner PPT-230/231

















Отзывы: