background image

4

INTERNATIONAL

 

SYMBOLS

S

AFETY

 I

NSTRUCTIONS

PERSONAL

 

CONDITION

 

AND

 

SAFETY

 

EQUIPMENT

Physical Condition

Your judgment and physical dexterity may not be good:
• if you are tired or sick,
• if you are taking medication,
• if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.

Eye Protection

Eye protection that meet ANSI Z87.1 or CE requirements
must be worn whenever you operate the unit.

Hand Protection

Wear no-slip, heavy duty work gloves to improve your
grip on the handles. Gloves also reduce the transmission
of machine vibration to your hands.

Hearing Protection

Wear hearing protection. ECHO recommends wearing
hearing protection whenever unit is used.

Proper Clothing

Wear snug fitting, durable clothing;
• Pants should have long legs, shirts with long sleeves.
• DO NOT WEAR SHORTS,
• DO NOT WEAR TIES, SCARFS, JEWELRY.

Wear protective hair covering to contain long hair.

Wear sturdy work shoes with nonskid soles;
• DO NOT WEAR OPEN TOED SHOES,
• DO NOT OPERATE UNIT BAREFOOTED.

Wear no-slip, heavy duty work gloves.

WARNING     

    DANGER

Hedge Clipper users risk injury to themselves and others if the hedge clipper is used improperly and or safety
precautions are not followed.  Proper clothing and safety gear must be worn when operating a hedge clipper.

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and understand

Operator's Manual.

Wear eyes, ears and

head protection

Emergency stop

Fuel and oil mixture

Finger Severing

Carburetor adjustment

- Low speed mixture

Safety/Alert

Avoid all power

lines. This unit is not

insulated against

electrical current.

Do not operate clos-
er than 15 M (50 ft.)
from electrical
hazards.

Keep bystanders at
least 15 meters
(50 feet) away.

Plan retreat path
from falling
objects.

Wear hand

protection. Use

two handed.

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

Wear slip resistant
foot wear.

Engine choke

control.

Ignition
ON/OFF

Chain lubrication

Primer bulb

15 M
(50 ft.)

Содержание Power Pruner PPT-230/231

















Отзывы: