manualshive.com logo in svg

Echo Power Blend TC-210, Руководство оператора

Поделиться
Скачать
Echo Power Blend TC-210 Скачать руководство пользователя страница 4

SAFETY

TC-210

4

X7504083609

© 4/2016 ECHO Inc.

Product Registration

To ensure trouble free warranty coverage it is important that you register your 
ECHO equipment on-line at www.echo-usa.com or by filling out the product 
registration sheet included in this manual. Registering your product confirms 
your warranty coverage and provides a direct link between you and ECHO if we 
find it necessary to contact you.

Additional or Replacement Manuals

Replacement Operator, Safety Manuals, and Parts 
Catalogs

 are available from your ECHO dealer or at 

www.echo-usa.com or by contacting ECHO Inc., 400 
Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). 
Always check the ECHO Web Site for updated information.

Safety Videos

 are available from your Echo dealer. A $5.00 shipping charge 

will be required for each video.

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts and 
helpful, informational messages preceded by symbols or key words. The 
following is an explanation of those symbols and key words and what they mean 
to you.

The safety alert symbol accompanied by the word “DANGER” calls 
attention to an act or condition which WILL lead to serious 
personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING” 
calls attention to an act or condition which CAN lead to serious 
personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION” calls 
attention to an act or condition which may lead to minor or 
moderate personal injury if not avoided.

Содержание Power Blend TC-210













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды