6
1.
SPARK PLUG
- Provides spark to ignite fuel mixture.
2.
THROTTLE POSITION LEVER
- Pull back to increase engine speed. Friction washers maintain throttle trig-
ger setting.
3.
SILENCER/SPARK ARRESTER
- The spark arrester muffler controls the exhaust noise while the spark ar-
rester prevents hot, glowing particles of carbon from leaving the muffler.
4.
FUEL TANK CAP
- For closing the fuel tank.
5.
CHOKE LEVER
- Lever is located on right side of the air cleaner. Move lever DOWN to close choke (starting
position) and for emergency stopping. Lift up to open choke (run position).
6.
AIR CLEANER
- Contains replaceable felt element.
7.
IGNITION SWITCH
- "SLIDE SWITCH" mounted on top of handle. Slide forward to start and run. Slide back
to stop.
8.
THROTTLE TRIGGER
- Spring loaded to return to idle when released if throttle position lever is not en-
gaged.
9.
BLOWER PIPES
- Twist lock design.
10.
VACUUM PIPE
- Sucks in materials to be shredded.
11.
VACUUM ELBOW
- Discharges shredded material.
12.
VACUUM BAG
- Collects shredded material.
13.
SHOULDER STRAP
- Secures debris bag to shoulder.
14.
STARTER HANDLE
- Pull handle slowly until starter engages, then return handle slowly. DO NOT let handle
snap back or damage to unit will occur.
15.
PURGE BULB
- Pumping purge bulb before starting draws fresh fuel from fuel tank to carburettor replacing
air and old fuel. Before starting, pump repeatedly (normally 3-4 times) until fuel is visible in "Clear" fuel return
line.
16.
SIDE HANDLE
- Provides grip for right hand.
17.
HOUSING COVER
- Covers blade area when closed.
DESCRIPTION
Содержание ES-2100ESL
Страница 1: ...OPERATOR S MANUAL ES 2100ESL LEAF SHREDDER WARNING READ OPERATOR S MANUAL X7531138201 08 10 ...
Страница 18: ...18 NOTES ...
Страница 19: ...19 NOTES ...