manualshive.com logo in svg
background image

3

RULES FOR SAFE OPERATION

WARNING          DANGER

USERS RISK INJURY TO THEMSELVES AND OTH-
ERS IF THE UNIT IS USED IMPROPERLY, AND/OR 
SAFETY PRECAUTIONS ARE NOT FOLLOWED. 
PROPER CLOTHING AND SAFETY GEAR MUST BE 
WORN WHEN OPERATING THIS UNIT.

OPERATOR SAFETY

•  Read this Manual carefully. Be sure you understand how 

to operate this unit properly before you use it.

•  Wear non-skid sole shoes. Do not wear open-toed   shoes 

or operate unit while bare footed.

•  Wear proper clothing to protect legs and other
  exposed parts of your body.
•  Wear eye, breathing and hearing protection devices.
•  Secure hair so it is above shoulder height.
•  Use caution when handling fuel. The fuel tank may   

be under pressure. Always loosen the fuel cap and  wait 
for pressure to be equalized before removing  

 

the cap. Put the fuel cap back tightly on both the fuel  
can and the fuel tank.

•  Move at least 3 m from the refuelling point and be sure 

there is no leakage of fuel from the fuel cap  

 

or the fuel system before starting the engine.

•  Wipe any spilled fuel off the unit.
•  Operate this petrol engine powered equipment in a well 

ventilated area only.

•  Do not operate this unit in closed areas such as garages, 

inside buildings, sheds, etc.

•  Start the unit on the ground with the throttle set at idle.
•  Do not start if the pipe is obstructed by the ground or any 

other object.

•  This unit is not designed as a limb shredder or chipper.  

Branches and debris should not be sucked in.

•  Inspect area where the unit is to be used.
•  Remove stones, metal objects and any other object that 

could cause injury or damage unit.

•  Do not use a unit on unstable surfaces.
•  Do not allow other persons or pets in the area when start-

ing or using the unit.

•  Do not point pipes or tube in the direction of people or  

animals.

• Keep a firm grip on the unit at all times.
•  Be certain the safety interlock switch operates correctly  

(unit must stop when vacuum tube is removed or fan  
guard is opened).

•  Keep hands and body away from hot surfaces such as  

silencer and cylinder area when handling the unit to  
prevent from heat injury.

•  Never attempt to use an incomplete machine or one  

fitted with unauthorized modification.

•  Never allow children to use the machine.

REDUCE NOISE - BE SMART!

NOTE

Before operating the unit, check and follow local regula-
tions concerning sound level and hours of operation.

•  Avoid using power units when people are likely to be  

disturbed, such as late at night or early in the morning.  
As a rule, operate units between 9 a.m. and 5 p.m. on  
weekdays and weekends.

•  Operate the unit at the lowest possible throttle setting  

that gets the job done.

•  Make sure the silencer works well.
•  Check the air intakes and the air filter to make sure the  

unit is working properly.

•  Use only one piece of equipment at a time.
•  Wear hearing protection when operating the unit.
•  Be a good neighbor. Keep debris on your property.

SPARK ARRESTER SILENCER

The spark arrester silencer controls the exhaust noise and 
prevents hot, glowing particles of carbon from leaving the 

unit.

Make sure the spark arrester screen is in good repair and 
properly seated in the silencer.

PHYSICAL CONDITION

Your judgement and/or dexterity may be impaired if you are 
ill, are taking medication, and/or have taken alcohol or other 
substances known to affect the way you would normally 
function.

Operate this unit only if you are in good physical and mental 
health.

Содержание ES-2100ESL





















Отзывы: