7
ASSEMBLING
WARNING DANGER
NEVER PERFORM MAINTENANCE OR ASSEM-
BLY PROCEDURES WITH ENGINE RUNNING.
NOTE
Never operate unit without either fan grid and blower
pipes or vacuum tube with vaccum elbow and debris bag
are installed securely on the unit.
INSTALLING VACUUM TUBE FOR VACUUM US-
AGE
1. Turn knob anticlockwise until fan grid is free. Pull fan grid
out for access to tube clamp.
Knob
NOTE
The tube will contact the safety interlock switch tab
when properly assembled onto the blower. A "click" will
be heard indicating the switch is activated allowing the
unit to operate. If the engine does not start, recheck the
tube mounting for straightness and engagement with the
blower housing.
4. Secure vacuum tube with clamp by tightening screw.
2. Loosen screw in clamp.
3. While holding housing cover open, align arrow on vac-
uum tube with interlock switch (D), and install vacuum
tube into blower housing. Secure vacuum tube with
clamp (B). Clamp fits under slotted guides (C).
C
B
D
C
5. Remove tube retaining screw from blower housing. Align
grooves in vacuum elbow with pegs on air outlet and
install vacuum elbow.
6. Turn vacuum elbow clockwise to lock it into place, point-
ing backward, then tighten the screw securely.
7. Place vacuum bag opening over end of vacuum elbow
and secure with velcro strap.
WARNING DANGER
THIS UNIT IS EQUIPPED WITH A SAFETY
INTERLOCK SWITCH WHICH ALLOWS THE
ENGINE TO START OR RUN ONLY WHEN THE
FAN GUARD IS IN PLACE OR THE VACUUM
TUBE IS INSTALLED. NEVER BEND OR DIS-
ABLE THIS SWITCH AND OPERATE THE UNIT;
OTHERWISE SEVERE INJURY MAY RESULT.
Содержание ES-2100ESL
Страница 1: ...OPERATOR S MANUAL ES 2100ESL LEAF SHREDDER WARNING READ OPERATOR S MANUAL X7531138201 08 10 ...
Страница 18: ...18 NOTES ...
Страница 19: ...19 NOTES ...