Echo DPB-600, Руководство по обслуживанию

Страница: 7 / 21

HANDLE GRIP
DPB-600
7
2-3 Resassembling trigger switch grip
1. Install throttle lever (N) on handle lid (A) and
fasten with the torx bolt (H). Check throttle lever (N)
works smoothly and set to the position as shown
(Fig. P : STOP position).
2. The terminal has no locking Tabs on connectors.
Gently push until connector is fully seated on con-
trol board assy (D) and switch (E).
3. Install switch (E), wire harness (t) and control
board (D) on fan case as shown.
6 pole terminals
D
E
4 pole terminal
E
D
t
N
H
Fig. P
A