TROUBLESHOOTING
7
DCS-1600
2-2 Troubleshooting chart (Continued)
Troubleshooting "STEP1" ~Checking battery and charger~
Start
A
D
B
E
F
C
No
Yes
Yes
No
No
Yes
M
G
No
H
Yes
K
Yes
J
L
Yes
N
Yes
No
No
P
Yes
Q
R
Step0
No
Step2
Step2
No
A:
Press battery buttton to indicate charging
status.
B:
Is LED indicator of battery lighting?
C:
Go to “Step 2” to find cause of battery failure.
After passing Step2 then replace the battery to
new one and continue to diagnosis.
*
*
Be sure to check Troubleshooting “Step2”
before installing new battery. If the unit has
something wrong, the battery can be damaged
again.
D:
Charge the battery.
E:
Is battery fully charged?
F:
Does LED indicator of charger remain red?
G:
Is LED indicator of charger flashing red?
H:
Does LED indicator of charger light?
J:
Prepare good battery and charger and then
cross-check.
K:
Battery failure?
L:
Go to “Step 2” to find cause of battery failure.
After passing Step2 then replace the battery to
new one and continue to diagnosis.
*
*
Be sure to check Troubleshooting “Step2”
before installing new battery. If the unit has
something wrong, the battery can be damaged
again.
M:
Is temperature of battery inside in the range of 5
to 40°C?
N:
Cool or warm battery as needed.(Rechargeble
temperature of battery inside is 5 to 40°C.)
P:
Are connectors of battery and charger dirty?
Q:
Clean connectors of battery and charger.
R:
Replace the charger with new one.
