![background image](http://html1.mh-extra.com/html/echo/dcs-1600/dcs-1600_service-manual_3890005031.webp)
SAW CHAIN LUBRICATION SYSTEM
29
DCS-1600
4-5 Seperating motor cover and replacing oil line
[Disassembling]
1. Remove cover and brake lever. (Refer to Sec-
tion 3-2)
2. Remove drum and worm gear. (Refer to Section
4-3)
3. Remove four bolts (W) and front handle.
4. Remove six bolts (X) (size : M4x16mm length),
bolt (Y) (size : M4x20mm length) and three bolts
(Z) (size : M5x20mm length) and seperate motor
cover.
5. Remove oil strainer. (Refer to Section 4-1)
6. Remove grommet (H) and oil line (G). If worn,
damaged or deformed, replace with new part(s) as
required.
7. Check oil tank vent (E). If blocked with dirt and/
or dust, clean around it.
W
W
X
X
Y
Z
H
G
E