SAW CHAIN LUBRICATION SYSTEM
27
DCS-1600
4-4 Replacing auto-oiler
NOTE:
Changed auto-oiler to use for auto-oiler of DCS-1600
[Disassembling]
1. Remove E-ring (P), washer (Q), drum (R) and
worm gear (N). (Refer to Section 4-3)
2. Screw bolt tip (u1) of auto-oiler puller Y089-
000131 into female thread part of auto-oiler (M).
3. Holding inner pipe (u2) with a 14 mm wrench,
rotate outer pipe (u3) counterclockwise by 17mm
wrench to pull out the auto-oiler.
dia.13mm
dia.11.5mm
【
Before change
】
Part number
Y089-000130
Part number
91073
Part number
91073A
【
After change
】
For DCS-1600
【
Before change
】
【
After change
】
For DCS-1600
Part number
Y089-000131
Auto-oiler puller
Auto-oiler installer
dia. 12.7mm
dia. 11.5mm
u2
M
u1
u3