![background image](http://html1.mh-extra.com/html/echo/cs-303t/cs-303t_instruction-manual_3983553018.webp)
16
CS-303T
WHEN THE ENGINE IS HARD TO
STARD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Move chain brake lever fully forward to lock
chain brake before starting.
• Turn ignition switch forward and choke control
knob all the way out.
• Push purge pump until fuel is visible in purge
pump.
• Press throttle trigger lockout down while
grasping throttle trigger and push in throttle latch
as shown.
• Securely hold the chain saw as shown.
When starting the chain saw place the unit on
a flat ground and hold the front handle with left
hand and hold firmly the rear end of rear handle
with right knee and pull starter handle with right
hand several times until first firing sound.
• Push choke control knob all the way in.
• Pull starter handle to start the engine.
• When engine starts, immediately squeeze and
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
CAUTION
1. When using throttle latch for starting, keep
the brake in lock position.
2. After starting the engine, immediately
squeeze and release throttle trigger for
disengaging throttle latch and returning
engine to idle, and pull front hand guard
towards the operator immediately. (Chain
brake unlocked position)
3. Do not increase engine speed while chain
brake is locked.
4. Use the chain brake only in starting or in
emergencies.
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Move chain brake lever fully forward to lock
chain brake before starting.
• Confirm there is fuel and chain oil in the tanks.
• Turn ignition switch forward, to position “
Run
”.
• Securely hold the chain saw as shown and pull
starter handle.
• Choke may be used if necessary, but be sure to
push it back on first firing sound.
• After starting the engine, pull front hand guard
towards the operator immediately. (Chain brake
unlocked position)
Open choke
Choke control knob
Unlock chain brake
Push
Throttle trigger lockout
Chain brake
Starter handle
Unlock chain brake
Start / Run
Ignition switch
Throttle trigger
Throttle latch
Содержание CS-303T
Страница 38: ......