15
CS-303T
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
• Move chain brake lever fully forward to lock
chain brake before starting.
• Fill the fuel tank with fuel mixture.
It is not permitted to fill fuel above the shoulder
level of fuel tank.
• Fill the chain oil tank with lubricant.
Do not over fill.
• Turn ignition switch forward, to position “
Run
”.
• Push purge pump until fuel is visible in purge
pump.
• Pull choke control knob all the way out. (Choke
position )
• Securely hold the chain saw as shown.
When starting the chain saw place the unit on
a flat ground and hold the front handle with left
hand and hold firmly the rear end of rear handle
with right knee and pull starter handle with right
hand several times until first firing sound.
• Push choke control knob all the way in. (Open
position )
• Pull starter handle to start the engine.
• After starting the engine, pull front hand guard
towards the operator immediately. (Chain brake
unlocked position)
OPERATION
Start / Run
Ignition switch
Purge pump
Chain brake
Choke
Choke control knob
Starter handle
Unlock chain brake
Содержание CS-303T
Страница 38: ......