Echo CS-2511T Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 36

Echo CS-2511T Скачать руководство пользователя страница 16

16

CS-2511T

EMISSION DATA

EMISSION CONTROL

(EXHAUST and EVAPORATIVE) EPA 2010 and/

or C.A.R.B. TIER III

The emission control system for the engine is EM/

TWC (Engine Modification and 3-way Catalyst)

and for the fuel tank the Control System is EVAP

(Evaporative Emissions) or N (for nylon tank).

Evaporative emission may be applicable to

California models only.

An Emission Control Label is located on the

engine. (This is an example only, information on

label varies by engine family).

PRODUCT EMISSION DURABILITY

(EMISSION COMPLIANCE PERIOD)

The 300 hours emission compliance period is

the time span selected by the manufacturer

certifying the engine emissions output meets

applicable emissions regulations, provided that

approved maintenance procedures are followed

as listed in the Maintenance Section of this

manual.

EMISSION CONTROL INFORMATION

ENGINE FAMILY: #EHXS.xxxxxx DISPLACEMENT: 25.0 cc

EMISSION COMPLIANCE PERIOD: 300 Hours

THIS ENGINE MEETS * * * * U.S. EPA EXH/EVP & CALIFORNIA

EXH/EVP EMISSION REGULATIONS FOR S.O.R.E. REFER TO OWNER’S

MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

* * * ? ? ? ?

Oil tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation

reduces friction between the chain and the guide

bar to a minimum and assures a longer service life.

• Use bar and chain oil of high quality for this

purpose.

• Do not use used or reclaimed oil to avoid various

oiler problems.

• Use ECHO bar and chain oil.

• Use bar and chain oil of the following grades:

SAE No. 30..............in summer

SAE No. 10..............in winter or when cutting

resinous trees

• When refueling, also refill chain oil.

Fuel tank cap

Cap indication

Oil/fuel tanks are indicated by the following

illustrations.

«
...
14
15
16
17
18
...
»

Содержание CS-2511T





































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды