Echo CS-2511T, Руководство владельца/оператора

Страница: 34 / 36

34 CS-2511T
* Technical data subject to change without notice.
TECHNICAL DATA
MODEL CS-2511T
Dimension L × W × H mm (in) 243 × 205 × 196 (9.57 × 8.07 × 7.72 )
Mass Power head, dry kg (lb) 2.3 (5.07) Without chain and guide bar
Engine Type Air-cooled two-stroke single cylinder
Displacement mL (in³) 25.0 (1.53)
Carburetor Diaphragm type
Magneto Flywheel magneto: CDI system
Spark plug NGK CMR7H
Starter Recoil starter
Power transmission Automatic centrifugal clutch
Fuel Mixture ratio 50:1 ratio with ECHO Power Blend X™ or ECHO
Red Armor® ISO-L-EGD (ISO/CD 13738) and JASO
M345-FD two-stroke, air-cooled engine oil.
Gasoline Use 89 octane unleaded.
Do not use fuel containing methyl alcohol, more than
10 % ethyl alcohol or 15 % MTBE.
Do not use alternative fuels such as E-15 or E-85.
Tank capacity L (fl oz) 0.190 (6.42)
Oil Bar and chain ECHO bar and chain oil
Tank capacity L (fl oz) 0.140 (4.73)
Guide bar and
saw chain
See page 23 for Chain and Guide Bar Combination
Lubrication Adjustable automatic oil pump
Engine speed Idle
RPM
2,800 - 3,600
Clutch engagement 4,100 - 4,600
Wide open throttle 12,200 - 13,400
Standard
features
Front hand guard, Anti-vibration device,
Throttle control lockout, Chain brake, Chain catcher,
Spark arrestor muffler, (Kick guard),
(Spiked bumper; option)
WARNING
Do not store in an enclosure where fuel
fumes may accumlate or reach an open flame
or spark.
CAUTION
Do not lend or rent your chain saw without
the operators manual and Safety manual.
NOTICE
• For future reference, you should keep this
operators manual and the Safety manual.
• If this operators manual or the Safety manual
has become illegible or is lost, please purchase
a new one from your ECHO dealer.
STORAGE AFTER USE
• Inspect and adjust every part of the chain saw.
- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
• Remove chain and guide bar.
• Drain fuel tank, pull starter slowly a few times
to drain fuel from carburetor.
• Pour a small amount of clean motor oil into
spark plug hole, pull starter and crank the
engine until piston reaches: TOP DEAD CEN-
TER.
• Store in a dry area, free from dust.