16
Before you start
Before you start
Assembly
Operation shaft assembly
Stand the engine upright on a level surface.
Fit the operation shaft ensuring that it is correctly engaged.
Tighten bolts (M5×20) to fasten the operation shaft.
U-handle assembly
Install the left handle in the handle support and fix it by lightly
tightening bolts (M5×35) .
Adjust inclination of handle to adequate position (easy to op-
erate) and firmly tighten bolts (M5×35).
Install the right handle in the bracket.
Position the handle in comfortable operating position and
tighten bolts (M5×25).
To eliminate loosening of throttle wire fix it to shaft tube (2
places) with wire fixing clips.
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
1. Bolt M5×20
1. Handle support
2. Adjustable
3. Left handle
4. Bolt M5×35
1. Right handle
2. Bracket
3. Bolt M5×25
4. Wire fixing clips
1. Wire end
2. Nuts
3. Carburettor
CAUTION
After assembly, adjust the play of wire end on carburettor
side to 1 mm - 2 mm.
Содержание BCLS-510ES
Страница 2: ......
Страница 84: ...42 Konformitätserklärung ...
Страница 85: ...43 X750 012 95 2 X750 216 410 2 2009 1Notizen und hintere Umschlagseite NOTIZEN ...
Страница 171: ......