Echo 9 Ultra H2, Руководство по эксплуатации

Страница: 26 / 36

26
Plug in your machine and turn the master power
switch on at the back of your machine.
Turn on the water supply to the machine
Supply water by opening the water supply valve.
Initial Operation
Start water flow through your machine and
check for leaks!
- Press the
"POWER"
button on the top of your faucet to
start the water flow then touch the “H
2
Water” Button on faucet.
NOTE:
The water may initially come out discolored (light to charcoal gray) due to
carbon particulates in the new filter. This is not harmful and is typical of all
carbon filters. Allow water to flow for 2-3 minutes in the "H
2
water" mode
and this will flush out all the carbon dust.
-Press Power Button on faucet to turn the machine off and stop the water flow.
1
2
3
11
10
12
Connect the power cord into an appropriate outlet under the sink.
Make sure the outlet always has power. Power to the machine must always be on.
Carefully plug in the faucet connector cable to the back of the machine. The connection
should be easy to push in. There is only one way to push it in.
Do Not force it, or it will be damaged.
H
2
WATER