Echo 9 Ultra H2, Руководство по эксплуатации

Страница: 24 / 36

24
How To Connect Water Faucet
All the fittings are push in style fittings. To attach the hoses to any fitting, firmly insert the end of
the hose into the fitting. Pull firmly to check the connection - you should not be able to pull the
hose out. To release the hose from the fitting, you must push the spring loaded ring protruding
from the end of the fitting while pulling the hose out.
WARNING:
Incorrect installation could
VOID
your valuable warranty.
Professional installation is recommended.
Use appropriate tools to make 1.25 in.
diameter hole in the location where faucet will
permanently set. Make sure the faucet location will
allow both spouts on the digital faucet to reach the
sink. The center of the hole for the faucet should
NOT be more than 2.5 in. from the edge of the sink.
After the faucet is fixed, connect it to fitting
with 5/16” hose(for Alkaline) like figure 4.
Check the hose whether it is inserted properly
or not. Also, connect it with 1/4” hose (for Acidic)
like figure4 and connect the faucet to the body
with connector cord.
Once centered secure the faucet to the counter
by tightening the circle nut under counter until the
faucet is secure and sufficiently tight.
Center the faucet in the hole properly over
the gasket.
To connect the faucet
Figure1
Figure2
Figure3
Figure4
2
1
3
4
1.25
White color
(Top Spout)
Red color
(Bottom Spout)
5/16”White color tube
(Top Spout)
1/4” Red color tube
(Bottom Spout)