Echo 9 Ultra H2, Руководство по эксплуатации

Страница: 13 / 36

Check for leakage by running water through
your machine before replacing the housing cover.
A
Echo
®
9 Ultra Replacement Filter
B
H
2
Water
Replacement
Filter
13
6
The filter life indicator will automatically reset
once the machine detects a new filter present.
7
Flush out the carbon dust.
8
Replace the filter housing cover.
5
Once new filter is installed, rotate the filter until the arrow on the filter is aligned
with the arrow on the machine.
Your Echo
®
filter is equipped with a genomic chip. This chip communicates with the
machine how much water has flowed through the filter.
Make sure the arrow on
filter lines up with the
arrow on the machine!
4
Insert the new filter into the compartment.
Remove the plastic caps covering both ends of the new filter.
Set the large opening (on the bottom of the filter cartridge)
onto the base in the center of the filter cushion.
Push the filter down and into the housing compartment
ensuring the opening at the top of the filter is seated
properly into the fitting, at the top of the housing.
Change filter with the same as method above.
4000
FILTER LIFE
The water flowing through will initially come out discolored
(light to charcoal gray) due to carbon particulates in the new filter.
It is not harmful.
Allow the water to flow for 2-3 minutes in the "H
2
" mode
and this will flush all the carbon dust.
A
B
Ultra Replacement Filte
er
Replacement
Filter
r.
A
B
★