Robotics Mower Quick Start Guide
P/N YB-071-00006-0A
REVISED 03/13/2019
Copyright ©2019 Yamabiko Europe S.A/N.V
All rights reserved
Power Switch
The power switch is located under the cover on the back
of the robot.
TM-2000 - right side.
TM-1000 - left side.
Move the power switch up, to the ON position, to
operate the robot.
Move the power switch down, to the OFF position, for
extended idle time or winter storage.
User Interface
Lift the STOP button up to access the user interface.
Use this interface to configure the robot.
Starting
To start the robot, press and hold
for five
seconds, then release it. The start-up procedure takes
approximately two minutes.
If the robot does not start, return it to the charging
station and completely charge the battery.
Stopping
Press the STOP button to stop the robot.
TM-1000
TM-2000
3
1
2
6
8
0
4
5
7
9
X
5
SEC
2
MIN
PUSH
WAIT
