ECG XMS 333 U, Инструкция по эксплуатации

Страница: 41 / 120

GB
40 41
40 41
Snooze function
The snooze function allows you to delay the active alarm by 9 minutes. If you want to do so, press the button
SNOOZE
once when the alarm is active. The alarm stops and starts 9 minutes later. During this time the alarm
clock icon flashes. If you want turn off this function, press related button ALARM ( 1 or 2 ).
Sleep function with music (from the remote control)
This feature allows you to set a countdown, after which the device will automatically switch to standby mode.
• Press repeatedly the button SNOOZE during listening on the remote control and select the required time
when the device should automatically shut off.
• You can select 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. The display shows “SLEEP”.
• If you want to check the remaining time until shut off, press SNOOZE once.
• If you want to cancel the function, press
SNOOZE
repeatedly, until the display shows “00”. The indicator
“SLEEP” disappears from the display.
Equalizer setting
While listening, you can change the setting of the equalizer by pressing repeatedly the button EQ . You can
choose between the Flat, Rock, Classic, Pop, Jazz modes.
Radio
1. Turn on the device as described above.
2. Press repeatedly the button
FUNCTION
to select “RADIO”. The display shows a radio frequency.
3. Press repeatedly the buttons
/
to select the required radio station.
4. If you want to find automatically the closest available station, press and hold for 2 seconds the button
or .
5. If the station broadcasts stereo, you can press FM ST to achieve the highest quality sound. If the station
broadcasts mono, it is better to switch off FM ST.
6. For optimal reception quality extend as much of the FM antenna as you can.
Presets of radio stations
You can store up to 20 radio stations in the system memory.
1. Tune in the station, which you want to save.
2. Press and hold for 2 seconds the button PRESET . The number of the preset starts flashing (e.g. “P01”).
3. Use buttons
/
to select the required number of the preset from P01 to P20 where you want to save
the currently played station.
4. Press repeatedly PRESET to confirm your selection.
5. Store other presets by repeating steps 1 to 4.
6. If you want to retrieve the station saved in the memory, press repeatedly PRESET until the required preset
is tuned in.
CD control
Disc playback
1. Turn on the device and press
FUNCTION
to select the CD mode.
2. Press EJECT to open the disc tray.
3. Insert the disc by pushing outward.
4. Press again the button EJECT to close the disc tray.
5. The device reads the disc and displays the total number of tracks.
6. Press
PLAY/PAUSE
to start playback.
7. If you want to pause the playback (pause) press the button PLAY/PAUSE once. Press again to continue
playback.
8. If you want to stop playback, press the button STOP
x
.
XMS 333 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 41 17.07.2016 16:10:31