ECG XMS 333 U, Инструкция по эксплуатации

Страница: 40 / 120

GB
40 41
40 41
POWER
The device requires DC 9V DC power supply 2000 mA. The polarity of the DC connector:
Connect the cable of the supplied power adapter into the jack at the rear of the unit and the plug of the
adapter into a suitable power outlet 100–240 V AC.
For the device to function it has to be connected to a power supply. The device cannot be powered by batteries.
BASIC FUNCTIONS
Turning the device on and off
1. Connect the device to power supply as described above.
2. The device is in a standby mode now, the display shows clock.
3. Turn on the device by pressing
STANDBY
(
3
on the device or
wl
on the remote control).
4. If you want to switch the device in the standby mode, press again the button STANDBY .
Setting the time
You can set the clock only in the standby mode.
1. While the device is in the standby mode press the button
CLK SET
. The time format will appear.
2. Using the buttons
/
choose between the 12 h and 24 h format.
3. Press again
CLK SET
. The hours begin to flash.
4. Using buttons
/
set the hour.
5. Press again CLK SET . The minutes start to flash.
6. Using buttons
/
set minutes.
7. Press again CLK SET to confirm the set time. The clock is now set.
Setting alarm
The alarm can be set only in the standby mode.
The device allows to set two different alarm clocks. You can select CD playback, radio or buzzer alarm.
1. While the device is in standby mode, press and hold for 2 seconds the button ALARM1 or ALARM2 . The
symbol or and the hour start flashing.
2. Using buttons
/
set the required hour.
3. Press again ALARM1 or ALARM2 . The minutes start to flash.
4. Using buttons
/
set minutes.
5. By repeated pressing ALARM1 or ALARM2 select the alarm mode.
6. Use buttons
/
to select between CD, radio or buzzer.
Activation/deactivation of the alarm
• If you want to activate previously set alarm clock, press the appropriate button
ALARM
(
1
or
2
) in the
standby mode. The display shows the alarm clock symbol or . The alarm will sound in preset time.
• If you want to deactivate the alarm clock, press the appropriate button ALARM ( 1 or 2 ) in the standby
mode. The alarm clock symbol or disappears from the display. The alarm is now deactivated and
will not sound.
Checking the alarm clock
• Press
INFO
to find out to what time and mode are the alarm clocks set.
Stopping the sounding alarm
• When the alarm sounds, press ALARM1 or ALARM2 to stop it. The alarm clock icon disappears from the
display. To make the alarm clock functional for the next day you have to activate it again.
XMS 333 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 40 17.07.2016 16:10:31