53
EN
•
This device does not support the NTFS fi le system. Make sure the memory device uses the FAT or FAT32
fi le system.
•
Memory cards with a maximum number of 999 saved fi les are supported.
•
This device is not capable of reading data directly from your mobile phone.
•
The memory device may not be recognized if a USB extension cable or hub is used.
•
The device does not support external hard drives and encrypted devices.
Listening to an MP3 player connected via LINE IN
•
Use the included cable. Plug the 3.5 mm jack into your MP3 player and plug the CINCH connectors on
the other end of the cable into the respective (red and white) LINE IN connectors on the back side of the
system.
• Press
SOURCE
on the remote controller or
on the front panel while the system is ON to select LINE IN.
•
Use the controls of your MP3 player to control the playback.
Note:
Make sure the volume is adjusted accordingly on both devices.
Amplifi er connection
•
Connect the LINE OUT connectors (red and white) on the back panel of the system to the LINE IN connectors
(red and white) on your amplifi er. Use a CINCH cable with connectors (not included).
CARE AND MAINTENANCE
Cleaning and maintenance
•
Unplug the system before cleaning. Do not use liquid cleaners or spray products for cleaning.
•
There are no elements inside the system that the user could repair himself. By removing the cover, you
expose yourself to dangerous voltage or other risks. Have all service operations carried out by a qualifi ed
repair shop.
Moisture condensation
•
Condensation can aff ect the proper functionality of the system in the following cases:
-
When suddenly moving the system from a cool area to a warm area and vice versa.
-
When the system is used in a room, where heating was just activated, or when cold air from the air
conditioning unit is directed towards the system.
-
When you move the system from an air conditioned room to a moist and warm environment.
-
In a moist room.
•
If moisture condensation aff ects proper system functionality, remove the disc, plug in the system, start
and leave to get used to the environment for 2 to 3 hours. Afterwards, the system is warmed up and the
moisture will vaporize. Leaving the system plugged in limits problems with moisture condensation to
a minimum.
Disc care
•
Do not touch the media side of the disc.
•
Do not put labels or stickers on discs.
•
Do not use solvents, anti-static sprays or benzene-based cleaners to clean discs.
•
Do not store discs in areas exposed to heat sources and in dusty or moist areas.
•
Place the discs vertically in their original cases. Stacking discs on top of one another can damage the discs.
