EN
CD MICROSYSTEM
48
SAFETY INFORMATION
Read carefully and keep for future use!
•
Read this manual thoroughly before connecting and using the device. Keep this manual for future
reference.
•
Do not open the device box. There are no elements inside that can be confi gured by the user. Have
a qualifi ed service technician perform repairs on the device.
•
Turn the equipment off when you are not using it. If you do not plan on using the device for a longer period
of time, turn it off , unplug the device and remove the disc. (The plug enabling the complete disconnection
from the power network should be easy to access for everyday use.)
•
Not using the system for a longer period of time can result in a defect or impaired functionality. We
recommend starting the system from time to time.
•
Do not place the system in areas exposed to heat sources or direct sunlight.
•
Do not install the system in areas exposed to moisture or rain or in a dusty area.
•
The device should not be exposed to dripping or splashing water and objects containing liquids should
not be placed upon it, for example vases.
•
Place the device on a horizontal, fl at and solid surface with good ventilation. Do not cover the air vents.
Doing so may damage the device by overheating.
•
The position of the power cord should not permit walking over the cord or being damaged, for example,
by placing heavy objects on the cord.
•
Refer to a qualifi ed repair shop for replacing a damaged power cord.
•
Do not expose batteries to excessive temperatures, e.g. direct sunlight, fi re etc.
•
Batteries shall only be replaced with ones of the same type. Otherwise there is a risk the system may
explode.
•
The sides of the system become warm after operating for a longer period of time. This is not a defect.
•
Use a soft and clean towel to clean the outer surface. Do not use chemicals or cleaning detergents.
•
Use only accessories recommended by the manufacturer.
The lightning symbol warns the user about dangerous voltage inside the device box, which
could cause injury by shock upon coming into contact with the internal elements of the device.
To reduce the risk of fi re or electric shock, do not remove the cover of the device. Have
a qualifi ed service technician perform repairs on the device.
This symbol represents that the device is classifi ed under the class 1 laser equipment group.
Harmful radiation may result in the laser ray coming into direct contact with the human body.
CONTENTS
SAFETY INFORMATION......................................................................................................................................................................48
DESCRIPTION ........................................................................................................................................................................................49
REMOTE CONTROLLER ......................................................................................................................................................................50
INSTALLATION ......................................................................................................................................................................................51
USING THE SYSTEM ............................................................................................................................................................................51
CARE AND MAINTENANCE ..............................................................................................................................................................53
TROUBLESHOOTING ..........................................................................................................................................................................54
TECHNICAL SPECIFICATIONS..........................................................................................................................................................55
