52
EN
4. When “P02” appears, enter the next track for your playlist and press
PROG
to confi rm.
5. Repeat steps 2 through 4 to program the remaining tracks on the playlist.
6. When your playlist is complete, press
PLAY
to play your custom playlist.
7. To repeat the program, press the
REPEAT
button during playback.
8. Press
STOP
to stop the playback.
Note:
The program will be deleted once the playlist fi nishes or is stopped.
Listening to the radio
An integrated FM antenna is found on the back panel of the system. For best reception, remember to unwind
the antenna.
• Press
SOURCE
on the remote controller or
on the front panel while the system is ON. The system will
switch to FM tuner mode.
Radio station auto-search
Via remote controller:
• Press
SEARCH
on the remote controller. The system automatically searches and saved available FM
stations.
Via the front panel:
• Press on the front panel. The system automatically searches and saved available FM stations.
Radio station manual search
Via remote controller:
• Hold
/
on the remote controller until you fi nd the station of your choice. Press
MEMORY
and via
the numerical buttons, select the pre-set number under which the station should be saved, and press
MEMORY
again to confi rm.
Via the front panel:
• Press
CH+
/
CH-
to select the next/previous saved station.
Exiting FM tuner mode
• Press
SOURCE
on the remote controller or
on the front panel to exit FM tuner mode. Pressing the
button again toggles between CD playback and radio.
Notes:
•
Adjust the antenna to the position with the best reception.
•
After adjusting the antenna to the best position, you can search for more radio stations.
•
The station frequency cannot be entered directly using the numerical buttons.
•
You can store up to 40 radio stations into the system memory.
Listening to tracks from a USB device
You can play media fi les saved to a USB device by connecting a USB memory device to the USB port of the
system.
•
Plug the USB memory device to the USB port on the front panel of the system.
• Press
CD/USB
on the remote controller to select the USB function.
•
Playback will start once the contents are loaded from the USB device.
Note:
Depending on the capacity of the memory device, the loading process can take longer than
a minute. Loading large memory devices can take even longer.
•
Select the track to play via
/
on the remote controller or
/
on the system.
•
You can also use the numerical buttons on the remote controller to select the track of your choice.
•
The selected track will automatically begin to play.
• Press
STOP
to stop playback.
Notes:
•
Do not remove the USB device while the system is ON.
•
Back up your data on a USB memory device to prevent losing your data.
